PRODUCT CATEGORY
2BE1S series new two-stage water ring vacuum pump
1172831801458708480
Classification:
Key words:
- Product description
-
- Commodity name: 2BE1S series new two-stage water ring vacuum pump
- Commodity ID: 1172831801458708480
-->2BE1S two-stage water ring vacuum pump product introduction:
2BE1S series water ring vacuum pump is a two-stage single-acting water ring vacuum pump based on the 2BE1 series, which has obtained the national invention patent.
As the latest invention patented product, 2BE1S series products have the following unique advantages:
High vacuum: Two-stage compression design, the ultimate vacuum can reach 2kPaA (-0.099MPaG), while the single-stage water ring vacuum pump can only reach 3.3kPaA (-0.098MPaG).
High efficiency and energy saving: The working efficiency of the high vacuum section (5~20kPaA or -0.096~-0.081MPaG) is 35% to 40% higher than that of a single-stage water ring vacuum pump, and energy consumption is correspondingly reduced.
High standard configuration: stainless steel, duplex steel, titanium, Hastelloy and other materials; mechanical seals at both ends; standard anti-cavitation devices; precision castings; imported bearings, etc.
Comparison of 2BE1S two-stage water ring pump and single-stage water ring pump:
Two-stage and single-stage water ring vacuum pumps are designed and developed for different operating conditions. It can be seen from the above curve that the pumping speed of the single-stage water ring vacuum pump at a higher vacuum degree (less than 20kPa) is seriously attenuated, and it is even less than 30% of the maximum pumping speed at 5 to 10kPa. The efficiency is extremely low under this working condition. High power consumption. However, it shows the advantage of large pumping capacity in the rough vacuum state. The two-stage water ring vacuum pump can obtain a higher pumping speed in a higher vacuum range, or maintain a higher vacuum in a large pumping rate range. When working in a higher vacuum, the efficiency is 35% to 40% higher than that of a single-stage water ring pump, and energy consumption is correspondingly reduced. Therefore, the appropriate vacuum pump should be selected according to the conditions of use to reduce energy consumption and economic operation.
Typical application of 2BE1S two-stage water ring vacuum pump:
■ The vacuum evaporation and rectification process of the matching evaporator: when working between 6-10kPaA, the efficiency is increased by more than 30% compared with the single-stage pump.
■ Atmospheric and vacuum vacuum device at the top of the fine chemical tower: When working between 5 and 6kPaA, it runs efficiently without the need to configure an atmospheric ejector, reducing equipment investment.
■ Power plant steam turbine condenser vacuum device: when working between 5 and 12kPaA, it can maintain high pumping speed and stable operation, without the need to configure an atmospheric ejector, high efficiency and energy saving.
■ Used as the front pump of the Roots vacuum pump: it can reduce the exhaust pressure of the Roots vacuum pump and avoid the phenomenon of overload, heating and even jamming of the Roots vacuum pump.
Performance curve of 2BE1S two-stage water ring vacuum pump:
Photo of 2BE1S two-stage water ring vacuum pump:

Technical parameters of 2BE1S series new two-stage water ring vacuum pump:
model
2BE1S102
2BE1S103
2BE1S152
2BE1S153
2BE1S1202
2BE1S203
2BE1S252
2BE1S253
Ultimate pressure kPa
2
2
2
2
2
2
2
2
Pumping rate m³/h
235
340
465
600
760
1130
1700
2450
Rotating speed rpm
1450
1450
1460
1460
980
980
740
740
Matching power kW
11
15
18.5
22
30
45
55
75
Water supply m³/h
1.3
1.7
2
2.2
2.4
3.1
5.2
6.2
Intake and exhaust caliber mm
50
50
65
65
100
100
125
125
Water supply caliber G3/4″
G3/4″
G3/4″
G3/4″
G3/4″
G3/4″
G1″
G1″
weightkg
350
400
530
560
1040
1340
2010
2500
Note: All types of vacuum pumps in the table adopt direct coupling transmission. For other transmission methods, please consult our company's engineers.
Online Inquiry