PRODUCT CATEGORY
2BL series water ring vacuum pump
1172831798895988736
Classification:
Key words:
- Product description
-
- Commodity name: 2BL series water ring vacuum pump
- Commodity ID: 1172831798895988736
-->working principle:
In normal applications, the working fluid of the water ring vacuum pump is mostly discharged directly. This water supply and drainage method will cause a lot of waste of water resources, and there are also the following shortcomings:
*Because the pumped gas is mixed with the working fluid when the water ring pump is pumping gas, the discharged water will contain some organic solvents and toxic substances. Due to the large amount of water discharge, the discharge of water causes great pressure on environmental protection.
* Water containing organic solvents and toxic substances will release harmful gases, which will increase environmental pollution, and the extracted organic solvents are not easy to recycle and are wasted.
In view of the above problems, more and more companies in the chemical, pharmaceutical, electronic and general industries have adopted the closed-circuit mode of the working fluid of the water-ring vacuum pump.
2BL series liquid ring vacuum pumps are integrated vacuum pumps with closed loop systems developed and produced to meet this demand.
The most basic 2BL series liquid ring vacuum pump closed circuit system is shown in the figure:
The pumped gas enters the liquid ring vacuum pump from the suction port, and enters the gas-liquid separator together with part of the working fluid after being compressed by the liquid ring vacuum pump. The gas-liquid two phases are separated in the separator, and the gas is discharged to the air cooler. The heat exchanger is sucked in by the vacuum pump for recycling. The liquid ring pump will generate heat during the working process. The main heat includes: the ineffective power of the vacuum pump; the heat caused by the higher temperature of the suction gas; the suction gas contains condensable gas and releases phase change heat during the compression process. The main function of the heat exchanger is to cool the working fluid through cooling water to keep the temperature of the working fluid within a reasonable range. The gas discharged from the separator is high in temperature and contains water vapor. After being cooled by the air cooler at the exhaust port, the gas is discharged and the water vapor is condensed into the water circulation system for reuse. In this way, the vacuum pump only needs to consume very little working water to maintain normal operation.
main feature:
1. The overall design integrates vacuum pump, gas-liquid separator, cooler, chassis, internal pipeline and other components, compact structure and small installation space.
2. It comes with a cooling system, and the working water is recycled after being cooled by the cooler, which greatly reduces the waste of water resources and the pollution of the environment from drainage.
3. The most concise interface, users only need to connect the air inlet pipe, connect the power supply, and inject working water to work, saving a lot of installation costs.Equipment composition:
The main components of the closed circulation system of 2BL series liquid ring vacuum pumps include:
Liquid ring vacuum pump Gas-liquid separator Condensation cooler Circulating water cooler Shared chassis Internal pipelineEquipment parameters: 50Hz, 380V, 3AC, IP55, F
model
Ultimate vacuum
mbar.AMaximum inspiratory volume
m3/hrated power
kWWorking fluid flow
m3/hnoise
dB(A)weight
kg2BL2041
50
26
0.83
~0※
63
38
2BL2061
50
48
1.2
~0※
67
55
2BL2101
50
69
2.4
~0※
70
68
2BL2141
50
105
3.5
~0※
73
105
2BL2251
50
152
4.0
~0※
70
195
2BL2281
50
200
5.5
~0※
72
210
2BL2341
50
235
7.5
~0※
70
225
2BL2351
50
235
7.5
~0※
75
500
2BL2501
50
460
12.0
~0※
75
570
2BL2801
50
680
2×11.0
~0※
76
775
2BL2901
50
820
2×12.0
~0※
77
925
※Because the 2BL series working fluid is used in closed circuit, the working fluid flow is close to zero (only a small amount of evaporation loss).
Online Inquiry
GUANGZHOU LIDUN MACHINERY EQUIPMENT CO.,LTD
Address: 102, No. 24, Yansha Road, Nanpu, Luopu Street, Panyu District, Guangzhou City, Guangdong Province, China
Tel: 020-39987161 39984969 39984681 34702976
Fax: 020-34541063
E-mail: lidunjixie@163.com
WeChat public account
Copyright©2020 Guangzhou Lidun Machinery Equipment Co., Ltd. All Rights Reserved.
