Product Center
YAH ceiling air handling unit
YAH ceiling air handling unit

Israel YAH ceiling air handling unit

The structure of the unit is a galvanized steel box with thermal insulation cotton, a built-in surface cooler and fan, and a plate-type nylon mesh filter. The hot and cold coils are all made of copper pipe sleeves with hyperbolic corrugated sheets, and the coil fin spacing is 10-12 pieces/inch. The fans, motors, and pulleys are all selected high-quality products, with stable performance and high efficiency. The fan adopts double-inlet centrifugal forward tilt Multi-blade fan, external rotor motor, protection grade IP54, F grade insulation. Closed-type three-phase asynchronous motor, protection grade IP54, F grade insulation, power supply 380V-3-50Hz, no need for lubrication of bearings. The filter can be taken out from the side or from below. The wet film humidifier is optional.

Category:

IsraelProduct Center

Israelrefrigerating system

Phone:400-888-8888

Inquire

Product Description

York YAH series ceiling-mounted air handling unit is a central air-conditioning terminal device.
Its function is to cool the air, dehumidification, drying, heating, isenthalpic humidification, filtration and purification, and as a fresh air unit.
The unit sends the treated air to a certain distance through the duct, which is especially suitable for air conditioning projects in small commercial office buildings and industrial applications. 
York YAH series air handling units provide 10 models for customers to choose from, and each model has a variety of piping methods for selection. The cooling capacity is from 8kW to 252kW, and the air volume is from 1500m3/h to 15000m3/h. 
York YAH1.5 to 06 units use external rotor centrifugal fans with a full pressure range of 146-235Pa, and YAH1.5 to 06 models use belt-driven centrifugal fans with a full pressure range of 180-320Pa. York YAH08 to 15 models use belt-driven centrifugal fans, and the total pressure range of the unit is 275-340Pa. 
This series of units has the characteristics of easy installation, simple use, small building area, low noise, large cooling capacity, long air supply distance, and reasonable price. 
The structure of the unit is a galvanized steel box with thermal insulation cotton, a built-in surface cooler and fan, and a plate-type nylon mesh filter. The hot and cold coils are all made of copper pipe sleeves with hyperbolic corrugated sheets, and the coil fin spacing is 10-12 pieces/inch. The fans, motors, and pulleys are all selected high-quality products, with stable performance and high efficiency. The fan adopts double-inlet centrifugal forward tilt Multi-blade fan, external rotor motor, protection grade IP54, F grade insulation. Closed-type three-phase asynchronous motor, protection grade IP54, F grade insulation, power supply 380V-3-50Hz, no need for lubrication of bearings. The filter can be taken out from the side or from below. The wet film humidifier is optional.

previous page:

IsraelYGFC fan coil

Israelnone

: next page