Papua New Guinea Vacuum system engineering
Category:
Papua New GuineaVacuum system engineering
Product Description
Vacuum system engineering
details：
| Product Brand: Lidun |
Product model：VSE |
Body material: combination |
| Drive mode: electric | Process use: vacuum | Working principle: vacuum system |
|
Motor Power：1-250kW |
Ultimate pressure：0.05～50000Pa |
Dimensions： |
Product number：
Customize various types of vacuum system engineering according to the actual situation of the owner of the vacuum process site.
Provide international brand, domestic brand vacuum pump unit, professional design, production, installation, can meet your general or special vacuum technology.
working principle:
Vacuum system engineering is a systematic engineering of a complete set of products and their installation including vacuum pumps, auxiliary equipment, vacuum pipelines, and vacuum terminal equipment. Compared with a single vacuum pump or vacuum equipment, this is a more complex systematic project, so it also requires professional optimization design and installation and construction. Whether it is a newly invested vacuum system or an existing vacuum system that needs technical transformation, when you need to do a comprehensive optimization and upgrade, we recommend that you use the vacuum system engineering services provided by Lidun.
Features:
Optimal design:
As a professional company in the vacuum industry with nearly ten years of experience in vacuum system design, Lidun can not only provide you with the optimized design of the vacuum system from the project planning, but also propose a more optimized vacuum system for your vacuum system during the project. The solution can also optimize the technical transformation of your existing vacuum system to save energy, reduce noise, reduce emissions, reduce consumption, and increase benefits.
The most comprehensive service:
From vacuum system planning, selection, design, manufacturing, to installation, commissioning, acceptance, training, to maintenance, repair, upgrade, update, etc., we can provide you with complete products and engineering services, and with the most professional The technology to ensure that your vacuum system meets the requirements of the production process, without the need for you to coordinate several companies to complete these tasks.
The most secure use:
When you adopt our most optimized design and accept our most comprehensive service, the long-term continuous normal operation of the vacuum system will be the most accurate guarantee. On the basis of satisfying your vacuum process, we will ensure that the vacuum system can achieve the best operating efficiency and longest service life, and provide efficient after-sales service at any time, so that you have no worries.
typical application:
*Typical application industries: food, pharmaceutical, medical, electronics, petroleum, chemical, plastic, etc.
*Typical application process: drying, concentration, adsorption, vacuum distillation, molecular distillation, vacuum degassing, etc.
Typical Case:
A company’s extruder centralized vacuum technology transformation project
The company’s original 15 extruder production lines used 15 small vacuum pumps for extrusion molding and degassing. The total power is 33kW. Each small pump is equipped with a circulating water tank and is directly installed next to the extruder production line. The vacuum is low during operation. High energy consumption, high failure rate, and direct exhaust of vacuum pump exhaust into the workshop, resulting in very high maintenance costs for the vacuum pump, and exhaust from the vacuum pump also pollutes the workshop air, affecting the respiratory health of workers.
In response to the above-mentioned drawbacks, Lidun Company, after careful research and careful design, puts forward a system solution for centralized vacuum: 4 sets of 11kW vacuum pumps are installed in the pump room to vacuum, and the vacuum is distributed to each of them through the vacuum main and branch pipelines. The production line directly replaced the original 15 small vacuum pumps.
This vacuum system technical transformation project was all designed and implemented by Lidun Company and has been put into normal production use. During the operation of the new vacuum system, the vacuum is very stable, the energy consumption is significantly reduced, the failure rate is greatly reduced, and the exhaust gas is also discharged outdoors, which overcomes the various disadvantages of the scattered use of small pumps.
Detailed information such as product performance curve:
Please call, fax, email or contact our sales engineer via QQ, we will serve you wholeheartedly.
TEL: 020-39987161 E-Mail: lidunjixie@163.com QQ:121450481
GUANGZHOU LIDUN MACHINERY EQUIPMENT CO.,LTD
Address: 102, No. 24, Yansha Road, Nanpu, Luopu Street, Panyu District, Guangzhou City, Guangdong Province, China
Tel: 020-39987161 39984969 39984681 34702976
Fax: 020-34541063
E-mail: lidunjixie@163.com
WeChat public account
Copyright©2020 Guangzhou Lidun Machinery Equipment Co., Ltd. All Rights Reserved.
